energy saving charcoal making machine

energy saving charcoal making machine
1. ISO9001:2000, CE.
2. High quality, Low price.
3. Perfect service, Easy maintenance.
energy saving charcoal making machine
Charcoal machine profile:
Charcoal machine is the device for the raw material such as wood, sawdust, peanut shells, corn, sugarcane bagasse, cotton stalk, corn stalk, rice husk, sawdust , miscellaneous branches and so on cruse into the granular within 10mm by crusher. the moisture content of less than 12% after drying, enter the bar make shape by the high temperature high pressure(do not add any additives),into the carbonization furnace(self-built kiln ) to carbonization, is the finished product charcoal. The charcoal machine production charcoal of high density, small volume, good flammability, would alternative to firewood and coal. The product general diameter is 50-60mm, aperture is 15-20mm, is hollow four or six corner column. The product is especially suitable for northern area heating in winter, greenhouse warming or ordinary life fuel. the full set of equipment of charcoal machine includes rod making machine, charring furnace, drying machines and other equipment.
Charcoal's production can be divided into four steps:
1. the raw materials through crusher into particles.
2. particles should be dry by drier, pay attention to control moisture.
3. the materials through rod making machine made of rod-like.
4, carbonization in the carbonization furnace, after cooling is the production charcoal.
Introduction of charcoal machine:
Raw material: wood,branches,sawdust,straw,peanut hull,corncob,boll hull,sunflower hull,coconut shell,etc.
Moisture of raw material:around 12%.
product shape:long bars in square shape or with hexagonal shape.
briquette(semifinished product) moisture:2.1%
briquette(semifinished product) density:1.2-1.5g/cm3
briquette (semifinished product) heat value:19.79MJ
Size of machine:width:0.85 m,height:0.63m,length:1.35m
Advantages of charcoal machine:
1. No binder is needed during processing, and no pollution when it burns.
2. We have added 5-6 grooves in the machine to discharge the vapors and help increase density. Moreover, we add a wedging-ring in the machine, which also helps to increase the density of wood sticks.
3. Wood sticks is easy for carrying and piling. We have also designed trolleys to help load the sticks.
4. Generally,oil seal is put inside the machines and oil seal is outside. When the oil seal goes wrong, we need to open the whole machine to change it. Now we have changed their positions and the process become easier.
5. The molding machine can be linked to the drier to form an automatic line.This is from our design and with patent rights.It can save labour cost.